LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Mounting >> Rear Mount >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Remove throttle body air inlet hose and air cleaner housing assembly.
  2. Remove three vertical bolts attaching rear mount bracket to transaxle case.
    Fig 1: Removing Rear Engine Mount
    G00385980Courtesy of CHRYSLER CORP.
  3. Raise vehicle on hoist.
  4. Remove rear mount bracket through bolt. See Fig 1.
  5. Loosen the front mount through bolt.
  6. Remove horizontal bolt attaching rear mount bracket to transaxle case.
  7. Remove mount bracket.
  8. Remove rear mount to suspension crossmember attaching bolts.
  9. Remove rear mount.
scientia non olet · About LEMON Manuals