LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Mounting >> Left Mount >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Disconnect negative battery cable.
  2. Remove throttle body air inlet hose and air cleaner housing assembly.
  3. Remove two nuts securing speed control servo bracket to left shock tower. Reposition servo.
  4. Support transmission with floor jack and wooden block.
  5. Remove the three vertical bolts from mount to transmission bracket (A). See FigureFigure.
  6. Slightly lower transmission with floor jack.
  7. Remove mount to frame rail fasteners (B) and remove mount. See Figure.
scientia non olet · About LEMON Manuals