LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Mounting >> Left Mount >> Removal & Installation >> Installation

Removal & Installation: Installation

  1. Position mount to frame rail. Install mount to frame rail fasteners (B). Torque fasteners to 33 N.m (24 ft. lbs).
    Fig 1: Installing Left Side Mount
    G00385979Courtesy of CHRYSLER CORP.
  2. Raise transmission into position with floor jack.
  3. Install three vertical bolts from mount to transmission bracket (A). Torque fasteners to 61 N.m (45 ft. lbs). See Fig 1.
  4. Remove floor jack and wooden block.
  5. Install speed control servo to left shock tower. Torque fasteners to 6.7 N.m (60 INCH lbs)
  6. Install throttle body air inlet hose and air cleaner housing assembly.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals