LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Mounting >> Front Mount >> Removal & Installation >> Installation

Removal & Installation: Installation

  1. Position front mount on lower radiator crossmember.
  2. Loose install front mount to bracket through bolt.
  3. Install front mount vertical bolts. Tighten bolts to 61 N.m (45 ft. lbs).
  4. Tighten the front mount horizontal through bolts to 61 N.m (45 ft. lbs).
  5. Lower vehicle.
scientia non olet · About LEMON Manuals