LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Block >> Vibration Damper >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Disconnect negative battery cable.
  2. Raise vehicle on hoist.
  3. Remove right front wheel and belt splash shield.
  4. Remove accessory drive belts
  5. Remove damper bolt.
  6. Remove damper by using Special Tools 8194 Insert and 8454 Puller.
Fig 1: Removing Vibration Damper
G00385976Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals