LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Block >> Structural Cover >> Removal & Installation >> Installation

Removal & Installation: Installation

CAUTION: The collar must be tightened using this service procedure, as damage to transaxle case and/or oil pan may occur.
  1. Position structural collar on oil pan and transaxle. See Figure.
  2. Loosely install all bolts.
  3. Tighten the collar to oil pan bolts to 55 N.m (40 ft. lbs).
  4. Tighten collar to transaxle bolts to 55 N.m (40 ft. lbs).
  5. Lower vehicle.
scientia non olet · About LEMON Manuals