LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Block >> Piston Rings >> Standard Procedure >> Piston Ring Fitting

Piston Ring Fitting

  1. Wipe cylinder bore clean. Insert ring and push down with piston to ensure it is square in bore. The ring gap measurement must be made with the ring positioning at least 12 mm (0.50") from bottom of cylinder bore. Check gap with feeler gauge. For clearance measurement see SPECIFICATIONS .
    Fig 1: Checking Gap On Piston Rings
    G00385971Courtesy of CHRYSLER CORP.
  2. Check piston ring to groove clearance. For clearance specifications see SPECIFICATIONS .
Fig 2: Measuring Piston Ring Side Clearance
G00385972Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals