LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Engine Block >> Crankshaft Oil Seal - Front >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Remove crankshaft vibration damper.
  2. Install Special Tool 8194, Insert into crankshaft nose. Remove seal using Special Tool 6771, (Remover).
    Fig 1: Removing Front Oil Seal
    G00385959Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals