- Remove cylinder head cover(s). See CYLINDER HEAD COVER - LEFT and CYLINDER HEAD COVER - RIGHT
.
CAUTION:
Always rotate engine by turning the crankshaft. Failure to do so will result in valve and/or piston damage.
- Rotate engine until the cam lobe is on its base circle (heel), on the rocker arm being removed.
CAUTION:
Depress valve spring only enough to remove rocker arm.
- Using Special Tools 8215-A and 8216-A Adaptor, depress valve spring only enough to release tension on rocker arm. See SPECIAL TOOLS .
Courtesy of CHRYSLER CORP.
- Remove rocker arm from cylinder head.
CAUTION:
If rocker arms are to be reused, identify position of rocker arms for reassembly in their original positions.
- Repeat procedure for each rocker arm removed.
- Inspect the rocker arm for wear or damage. See INSPECTION .