LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Cylinder Head >> Intake/Exhaust Valves & Seats >> Standard Procedure - Valve & Valve Seat Refacing >> Notes

Standard Procedure - Valve & Valve Seat Refacing: Notes

The intake and exhaust valves have a 44.5 to 45 degree face angle. The valve seats have a 45 to 45.5 degree face angle. The valve face and valve seat angles are shown in figure.

Fig 1: Refacing Valve Face & Seat
G00378530Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals