LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Cylinder Head >> Camshaft (S) >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Remove the primary timing chain. See INSTALLATION - TIMING CHAIN .
  2. Remove secondary chain tensioner mounting bolts.
    NOTE: Camshaft bearing caps have been marked during engine manufacturing. For example, number one exhaust camshaft bearing is marked "1E>"
  3. Slowly loosen camshaft bearing cap bolts in reverse order of installation. See Figure.
  4. Remove camshaft bearing caps.
  5. Remove camshafts, secondary chain, and tensioner together as an assembly.
  6. Remove tensioner and camshaft chain from camshafts.
  7. Inspect camshafts. See INSPECTION .
scientia non olet · About LEMON Manuals