LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Air Intake System >> Air Cleaner Housing >> Removal

Air Cleaner Housing: Removal

  1. Disconnect negative battery cable.
  2. Disconnect inlet air temperature sensor electrical connector. See Figure.
  3. Disconnect fresh air makeup hose from throttle body air inlet hose. See Figure.
  4. Remove hose from throttle body.
  5. Remove nut on bracket that holds air cleaner housing.
  6. Pull air cleaner housing straight up off of locating pins.
scientia non olet · About LEMON Manuals