LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Air Intake System >> Air Cleaner Housing >> Installation

Air Cleaner Housing: Installation

  1. Install air cleaner housing straight down on locating pins. Install throttle body air inlet hose to throttle body. Tighten hose clamp
  2. Install nut on bracket that holds air cleaner housing and tighten.
  3. Four cylinder models: Install push pin that secures air duct to upper radiator support.
  4. Install throttle body air inlet hose to throttle body. Tighten hose clamp.Figure.
  5. Connect fresh air makeup hose. See Figure.
  6. Connect inlet air temperature sensor electrical connector. See Figure.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals