LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Air Intake System >> Air Cleaner Element >> Installation

Air Cleaner Element: Installation

  1. Clean any debris from inside air cleaner housing.
  2. Install air cleaner element into air cleaner housing. Verify element rests properly on mounting bosses inside air cleaner housing.
    Fig 1: Installing Air Cleaner Element
    G00378514Courtesy of CHRYSLER CORP.
  3. Install throttle body air inlet hose into air cleaner housing. Push in on hose until an audible "click" is heard from locking tabs.
  4. Install hose on throttle body. Tighten hose clamp. See Figure.
  5. Connect fresh air makeup hose. See Figure.
  6. Connect inlet air temperature sensor electrical sensor. See Figure.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals