LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Except Coupe >> Engine Coolant Thermostat >> Removal >> Removal - 2.4L

Removal - 2.4L

WARNING: DO NOT REMOVE PRESSURE CAP OR ANY HOSE WITH THE SYSTEM HOT AND UNDER PRESSURE BECAUSE SERIOUS BURNS FROM COOLANT CAN OCCUR.
  1. Partially drain cooling system below thermostat level.
  2. Disconnect hoses at coolant outlet connector.
  3. Remove bolts attaching coolant outlet connector (Fig 1).
  4. Remove coolant outlet connector and thermostat.
Fig 1: Identifying Coolant Outlet Connector - 2.4L
G03614913Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals