LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Except Coupe >> Engine Coolant Thermostat >> Installation >> Installation - 2.4L

Installation - 2.4L

  1. Clean sealing surfaces.
  2. Place the new thermostat assembly into the coolant outlet connector. Align air bleed with notch on the coolant outlet connector (Fig 1).
  3. Install coolant outlet connector onto thermostat housing and tighten bolts to 12.5 N.m (110 in. lbs.) (Figure).
  4. Connect hoses to coolant outlet connector.
  5. Fill cooling system (Refer to COOLING SYSTEM - FILLING ).
    Fig 1: Identifying Thermostat Indexing - 2.4L
    G03614915Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals