LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Except Coupe >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

  1. With engine cold, partially drain cooling system below level of ECT sensor.
  2. Disconnect ECT sensor electrical connector (Fig 1) or (Fig 2).
  3. Remove ECT sensor.
    Fig 1: Identifying ECT Sensor 2.4L
    G03614911Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Identifying ECT Sensor 2.7L
    G03614912Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals