LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Except Coupe >> Engine Block Heater >> Removal >> Removal - 2.7L

Removal - 2.7L

  1. Raise vehicle on hoist.
  2. Detach power cord plug from heater (Fig 1).
  3. Remove block heater attaching screw located below heater terminals.
  4. Remove block heater from cylinder block.
    Fig 1: Removing Engine Block Heater (2.7L)
    G03614910Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals