LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Except Coupe >> Engine Block Heater >> Removal >> Removal - 2.4L

Removal - 2.4L

  1. Drain cooling system (Refer to COOLING SYSTEM - DRAINING ).
  2. Raise vehicle on hoist.
  3. Detach power cord plug from heater.
  4. Loosen screw in center of heater. Remove heater assembly (Fig 1).
    Fig 1: Removing Engine Block Heater (2.4L)
    G03614909Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals