LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Except Coupe >> Coolant Outlet Connector >> Installation >> 2.4L Engine

2.4L Engine

  1. Clean sealing surfaces. Inspect gaskets for tears and cuts. Replace as necessary.
  2. Install coolant outlet connector and tighten bolts to 12 N.m (105 in. lbs.) (Figure).
  3. Connect hoses at coolant outlet connector.
  4. Fill cooling system (Refer to COOLING SYSTEM - FILLING ).
scientia non olet · About LEMON Manuals