LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Electrical >> Gauges >> Analog Instrument Panels - Except Coupe >> Removal & Installation >> Instrument Cluster >> Removal

Instrument Cluster: Removal

  1. Disconnect negative battery cable and wait at least 2 minutes. Remove left end cover by pulling outward. Tilt steering column down to its lowest position. Remove instrument cluster center bezel by disengaging 4 clips. See Fig 1 .
  2. Remove 4 instrument cluster hood mounting screws. Three screws are located behind center bezel, and one screw is located at left end of hood. Pull hood rearward to disengage 8 clips.
  3. On models equipped with Compass/Temperature Mini Trip Computer (CMTC), pull hood rearward only about 3 inches. On all models, reach through radio opening and disconnect CMTC wire connector. Remove cluster hood.
  4. Remove 4 instrument cluster mounting screws. See Fig 1 . Disconnect wire connectors from instrument cluster by pulling instrument cluster rearward. Remove instrument cluster.
Fig 1: Exploded View Of Instrument Cluster (Sebring Sedan & Stratus Sedan Shown; Sebring Convertible Is Similar)
G95D14509Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals