LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 - Except Coupe >> Diagnosis & Testing >> Abs Verification Test

Abs Verification Test

  1. Turn ignition off. Connect or install all previously disconnected connectors and removed components. Go to next step.
  2. Using scan tool, clear all system trouble codes. Turn ignition on. Using scan tool, read system trouble codes. If any system trouble codes are set, perform test for appropriate code. If no system trouble codes are set, go to next step.
    CAUTION: Ensure brake system has braking capability before road testing vehicle. Ensure scan tool is not in ABS diagnostics mode during road test, or ABS will be disabled.
  3. Road test vehicle for at least 5 minutes. Perform several ABS stops and traction control starts (if equipped). Go to next step.
  4. Using scan tool, read system trouble codes. If any system trouble codes are set, perform repairs for appropriate test. If no system trouble codes are set, customer's complaint cannot be duplicated. Repair is complete.
scientia non olet · About LEMON Manuals