Center Console: Removal
- Raise park brake lever as high as possible. Move transmission shifter to neutral position.
- Loosen set screw on front of shifter knob and remove shift lever knob. Remove lighted transmission range indicator bezel. See Fig 1 .
- Disconnect transmission range indicator bezel wire connector at the shifter mechanism. Remove screws, next to floor shifter and in console storage compartment, attaching floor console to brackets on floor pan. See Fig 2 .
- Disconnect wire connector for floor console accessories at floor pan. Remove console from vehicle.
NOTE:
The grip portion of the park brake lever will only fit through the wider lower portion of the slot in the floor console.