Disabling System (Metro)
- Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS . Ensure front wheels are in straight-ahead position. Turn ignition switch to LOCK position. Remove key from ignition switch. Remove AIR BAG fuse from fuse block located near base of steering column. Wait one minute.
- Remove steering wheel left-side trim cover. Release the connector lock and disconnect driver air bag Yellow 2-pin connector. See Figure.
- Open glove box door. Pull glove box out while pushing left and right-side stoppers in. Release the connector lock and disconnect passenger air bag Yellow 2-pin connector. See Figure.