LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Supplemental Inflatable Restraint System - Air Bag Deactivation Procedures >> General Motors >> Disabling & Activating Air Bag System >> Activating System (Blazer, Bravada, Envoy, Jimmy, Sonoma & S10)

Activating System (Blazer, Bravada, Envoy, Jimmy, Sonoma & S10)

  1. Remove key from ignition switch. Ensure SIR fuse is still removed from fuse block. Connect passenger air bag 2-pin Yellow SIR connector. Install CPA clip. Connect driver air bag 2-pin Yellow SIR connector at base of steering column. Install CPA clip. Install knee sound insulator and knee bolster.
  2. Install SIR fuse in fuse block. Staying away from both air bags, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.
Fig 1: Locating Driver Air Bag Yellow 2-Pin Connector (Blazer, Bravada, Envoy, Jimmy, Sonoma & S10)
G98F13586Courtesy of GENERAL MOTORS CORP.