LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Supplemental Inflatable Restraint System - Air Bag Deactivation Procedures >> General Motors >> Disabling & Activating Air Bag System >> Activating System (Sierra, Silverado, Suburban, Tahoe, Yukon & Yukon XL)

Activating System (Sierra, Silverado, Suburban, Tahoe, Yukon & Yukon XL)

  1. Remove key from ignition switch. Ensure AIR BAG fuse is still removed. Connect the passenger side air bag 2-pin Yellow SIR connector. Install CPA clip. Repeat procedure for driver side air bag connector.
  2. Connect passenger air bag 2-pin Yellow SIR connector behind glove box. Install CPA clip. Connect driver air bag 2-pin Yellow SIR connector at base of steering column. Install CPA clip.
  3. Install AIR BAG fuse in fuse block. Staying away from both air bags, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.
Fig 1: Locating Driver Air Bag Yellow 2-Pin Connector (Sierra, Silverado, Suburban, Tahoe, Yukon & Yukon XL)
G98E13585Courtesy of GENERAL MOTORS CORP.
Fig 2: Locating Passenger Air Bag Yellow 2-Pin Connector (Sierra, Silverado, Suburban, Tahoe, Yukon & Yukon XL)
G99D00383Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals