LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Rear Disc Brake Pads >> Removal

Rear Disc Brake Pads: Removal

  1. Raise and support vehicle. Remove rear wheel. Remove rear brake caliper-to-adapter guide pin bolts from rear brake caliper.
  2. Remove rear brake caliper from adapter by first rotating top of rear brake caliper away from adapter, then lifting rear brake caliper from machined area on adapter. Secure rear brake caliper aside to prevent damage to flexible brakeline.
  3. Remove outer rear disc brake pad from rear brake caliper by prying retaining clip on outer rear disc brake pad over raised area on rear brake caliper. Slide outer rear disc brake pad from rear brake caliper. Pull inner rear disc brake pad away from piston in rear brake caliper until retaining clip is free from cavity in piston. Remove inner rear disc brake pad.
scientia non olet · About LEMON Manuals