LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Rear Brake Caliper >> Removal

Rear Brake Caliper: Removal

  1. Raise and support vehicle. Remove rear wheel. Remove rear brake caliper-to-adapter guide pin bolts from rear brake caliper.
  2. Remove rear brake caliper from adapter by first rotating top of rear brake caliper away from adapter, then lifting rear brake caliper from machined area on adapter. Secure rear brake caliper aside to prevent damage to flexible brakeline.
  3. Disconnect brakeline from rear brake caliper. Remove rear brake caliper. Remove rear disc brake pads from rear brake caliper (if necessary).
scientia non olet · About LEMON Manuals