LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting Systems - Exterior >> Headlamp >> Removal >> 300M Special - High Intensity Discharge Headlamps >> Ballast Module

Ballast Module

  1. Remove headlamp unit (Refer to REMOVAL  ).
  2. Disconnect the igniter/lamp assembly connector from ballast module (Fig 1 ).
  3. Remove the three retaining screws to the ballast module (Fig 1 ).
    Fig 1: Identifying HID Ballast Module Components
    G02709437Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals