LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Sebring LXi >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes - Coupe >> Adjustments >> Stoplight Switch

Stoplight Switch

  1. Ensure brake pedal height is within specification. See BRAKE PEDAL HEIGHT  under ADJUSTMENTS. Disconnect stoplight switch connector. Loosen stoplight switch lock nut.
  2. Rotate stoplight switch clockwise until it contacts the brake pedal stopper (just before brake pedal arm begins to move). Rotate stoplight switch counterclockwise 1/2 to 1 turn. Tighten stoplight switch lock nut. Reconnect stoplight switch connector.
  3. Distance from brake pedal arm to tip of threaded portion of stoplight switch should be .02-.04" (0.5-1.0 mm). Ensure stoplights are not lit with brake pedal released.
scientia non olet · About LEMON Manuals