LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Sebring LX >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes - Coupe >> Adjustments >> Brake Pedal Height >> Brake Pedal Pressed

Brake Pedal Pressed

  1. Start engine. Press brake pedal with approximately 110 lbs. (50 kg) of force. If clearance between top of brake pedal pad and floor is 3.5" (90 mm), pedal height is acceptable.
  2. If clearance is less than 3.5" (90 mm), bleed brake system. See BLEEDING BRAKE SYSTEM . If pedal height is still less than 3.5" (90 mm) after bleeding brake system, check brake lining clearance, or for dragging parking brake.
scientia non olet · About LEMON Manuals