Breeze, Cirrus, SEBRING Convertible & Stratus Sedan: Installation

1. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS . Ensure reference marks on torque converter and drive plate are aligned.
CAUTION: On 2.4L models, proper tightening procedure must be followed when installing oil pan support collar, or oil pan and/or oil pan support collar may be damaged. See TORQUE SPECIFICATIONS .
2. On 2.4L models, install oil pan support collar. On all models, fill transaxle with appropriate fluid. See appropriate SERVICING article in AUTOMATIC TRANSMISSIONS.

Fig 1: Locating Transmission Control Module (Breeze, Cirrus, Sebring Convertible & Stratus Sedan)

Courtesy of CHRYSLER CORP.

Fig 2: Locating Crankshaft Position Sensor (Cirrus, Sebring Convertible & Stratus Sedan)

Courtesy of CHRYSLER CORP.