LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Self-Diagnostic System >> Instrument Cluster Self-Diagnostics

Instrument Cluster Self-Diagnostics

  1. As a quick diagnosis, instrument cluster will perform a function check immediately after ignition is switch is turned to RUN/START position. Electronic display, odometer/transmission range indicator and all warning lights EXCEPT low fuel, cruise, high beam, foglights and turn signal will light for a brief period. If cluster is not receiving PCI bus messages, cluster will appear non-functional and NO BUS will be displayed in odometer display.
  2. Instrument cluster self-test procedure can be initialized by pressing and holding the odometer reset button and turning ignition from lock to unlock. Instrument cluster will perform various steps to internally check operation.
  3. If instrument cluster is not functioning properly or not receiving PCI bus messages, see BODY CONTROL MODULES - CONCORDE, INTREPID, LHS & 300M article. If diagnostic procedure indicates replacement of instrument cluster, see INSTRUMENT CLUSTER & BEZEL  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals