Rear Door Striker: Service and Repair

LATCH STRIKER

REMOVAL

1. Open rear door.
2. Mark location of door latch striker on C-pillar to assist installation alignment.

Fig. 7:

3. Remove bolts holding striker to C-pillar (Fig. 7).
4. Remove door latch striker from vehicle.

INSTALLATION

1. Place door latch striker in position on vehicle.
2. Install bolts attaching striker to C-pillar.
3. Align striker to marked location on C-pillar and tighten bolts.
4. Verify alignment and operation of door, adjust as necessary.