Rear Wheel Bearings: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1999 Plymouth Breeze, 1999 Dodge Stratus, 1999 Chrysler Cirrus, 1998 Plymouth Breeze, and 1998 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Using NEW hub and bearing assembly-to-rear spindle nut, tighten nut to specification. See TORQUE SPECIFICATIONS table.
- Install wheels. Tighten wheel nuts in crisscross sequence to half torque, then repeat tightening sequence to full torque. See TORQUE SPECIFICATIONS table.