LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1999 >> Sebring Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Disc Brakes & Drum Brakes - Except Coupe) >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1999 Plymouth Breeze, 1999 Dodge Stratus, 1999 Chrysler Cirrus, 1998 Plymouth Breeze, and 1998 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect brake fluid level sensor. See BRAKE FLUID LEVEL SENSOR  . Disconnect and plug primary and secondary brakelines. See Figure . Clean area around master cylinder. Remove master cylinder attaching nuts, and remove master cylinder.