Disc Brake Specifications

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1999 Plymouth Breeze, 1999 Dodge Stratus, 1999 Chrysler Cirrus, 1998 Plymouth Breeze, and 1998 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Caliper Bore Diameter

1998 Models

2.125 (54)

1999 Models

1.31 (33.4)

Disc Diameter

⁽¹⁾

Lateral Runout

.005 (.13)

Parallelism (Maximum Thickness Difference)

.0005 (.0130)

Original Thickness

.900-.911 (22.87-23.13)

Minimum Refinish Thickness⁽²⁾

.843 (21.4)

Master Cylinder Diameter

⁽³⁾ .874 (22.20)

⁽¹⁾	Information is not available from manufacturer.

⁽²⁾	Minimum refinish thickness may be marked on disc. If different from specified thickness, use disc marking.

⁽³⁾	Service to bore not recommended.