LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1998 >> Cirrus >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.5L V6 ENGINE - VIN [H] (Except Coupe) >> Overhaul >> Cylinder Head Overhaul >> Valve Springs

Valve Springs

  1. Valve springs are installed with enamelled end facing rocker arms. Inspect valve spring pressure and free length. Replace spring if it is not within specification. See VALVES & VALVE SPRINGS  table under ENGINE SPECIFICATIONS.
  2. Measure valve spring installed height from spring seat to bottom of spring retainer. If spacers are installed, measure from top of spacer. If height exceeds 1.74" (44.2 mm), install a 0.030" (.762 mm) thick spacer in cylinder head counterbore to obtain correct installed height. See VALVES & VALVE SPRINGS  table.
scientia non olet · About LEMON Manuals