LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1998 >> Cirrus >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes - Except Coupe >> Removal & Installation >> Rear Wheel Bearings >> Installation

Rear Wheel Bearings: Installation

  1. To install, reverse removal procedure. Using NEW hub and bearing assembly-to-rear spindle nut, tighten nut to specification. See TORQUE SPECIFICATIONS  table.
  2. Install wheels. Tighten wheel nuts in crisscross sequence to half torque, then repeat tightening sequence to full torque. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals