LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1997 >> LHS >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Adjustments >> Stoplight Switch

Stoplight Switch

  1. Stoplight switch is located in mounting bracket near top of brake pedal. Rotate stoplight switch 30 degrees counterclockwise and remove switch from mounting bracket. Disconnect electrical connector from stoplight switch.
  2. Pull plunger on stoplight switch outward until plunger has ratcheted outward to the fully extended position. Fully depress brake pedal. Install stoplight switch in mounting bracket so index tab on stoplight switch aligns with slot in mounting bracket.
  3. With stoplight switch fully seated in mounting bracket, rotate stoplight switch 30 degrees to lock stoplight switch in mounting bracket. Reinstall electrical connector on stoplight switch.
    CAUTION: DO NOT use excessive force when pulling brake pedal upward or stoplight switch may be damaged.
  4. Gently pull brake pedal upward toward stoplight switch until brake pedal stops moving. This will ratchet plunger on stoplight switch backward to the correct operating position.
scientia non olet · About LEMON Manuals