LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1996 >> Sebring LXi >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.5L V6 Engine - VIN [N] - Avenger & SEBRING Coupe >> Engine Oiling >> Oil Pump >> Removal & Disassembly

Removal & Disassembly

NOTE: Following procedure is with engine removed from vehicle, and timing belt and crankshaft sprocket removed from engine.
  1. Remove oil pan. See OIL PAN  under REMOVAL & INSTALLATION.
  2. Remove oil pick up tube and gasket. Remove pressure relief valve plug. Remove pressure relief valve spring and plunger. See Figure. Remove crankshaft front oil seal. Remove pump cover bolts and pump cover. Make alignment dots on outer and inner rotors for reassembly reference. Remove inner and outer rotors.
scientia non olet · About LEMON Manuals