LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1996 >> Sebring LXi >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes - Coupe >> Adjustments >> Brake Pedal Height >> Brake Pedal Released

Brake Pedal Released

  1. Measure brake pedal height between pedal pad (foot contact) and floor. Brake pedal height should be 6.9-7.1" (175-180 mm). To adjust, disconnect stoplight switch connector. Loosen stoplight switch lock nut. Rotate stoplight switch counterclockwise until it no longer contacts brake pedal arm.
  2. Loosen brake pedal rod lock nut. Using pliers, turn brake pedal rod until brake pedal height is as specified. If necessary, turn rod clockwise as viewed from driver's seat to increase pedal height. Tighten brake pedal rod lock nut. Adjust stoplight switch. See STOPLIGHT SWITCH  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals