LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> Sebring LXi >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Overhaul - 41TE & 41AE Automatic Transmission >> Testing >> Clutch Air Pressure Tests >> Underdrive Clutch

Underdrive Clutch

  1. Apply air pressure to low-reverse and 2-4 clutches. Output shaft should now be locked. Wrap rubber hose around input shaft. Install clamp-on pliers on input shaft. Rotate input shaft.
  2. Apply air pressure to underdrive clutch (UD) passage on adapter plate. See Fig 1. Input shaft should not rotate with hand torque. Release air pressure. Ensure input shaft now rotates.
Fig 1: Applying Air Pressure To Clutch Packs
G92F12588Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals