LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> Sebring LXi >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Stoplight Switch

Stoplight Switch

  1. Ensure brake pedal height is within specification. See BRAKE PEDAL HEIGHT under ADJUSTMENTS . Disconnect stoplight switch connector. Loosen stoplight switch lock nut.
  2. Rotate stoplight switch clockwise until just before brake pedal arm begins to move, then rotate counterclockwise 1/2 to 1 turn. Tighten stoplight switch lock nut. Reconnect stoplight switch connector.
  3. Distance from brake pedal arm to tip of threaded portion of stoplight switch should be .02-.04" (0.5-1.0 mm). Ensure stoplights are not illuminated with brake pedal released.
scientia non olet · About LEMON Manuals