Parking/Emergency Brake

Pull parking brake lever with 45 lb. (20 kg) force. If lever moves 3-5 notches (rear disc) or 5-7 notches (rear drum), parking brake is properly adjusted. If lever does not move as specified, remove carpet in center console. Loosen parking brake cable rod adjusting nut.
On models with rear drum brakes, forcefully depress brake pedal 5-6 times with engine idling. Ensure pedal stroke stops changing as automatic-adjustment mechanism adjusts shoe clearance. On models with rear disc brakes, remove adjustment hole plug from rear brake disc. Using flat-blade screwdriver, turn adjuster clockwise to expand brake shoe until disc will not rotate. Turn adjuster 5 notches counterclockwise.
On all models, tighten parking brake cable rod adjusting nut until lever moves 3-5 notches (rear disc) or 5-7 notches (rear drum). Ensure no play exists between adjusting nut and pin. Ensure adjusting nut is securely held at nut holder.
Raise and support rear of vehicle. Release parking brake and ensure brakes do not drag. If brakes drag, readjust parking brake lever.