LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> Sebring LXi >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Brake Pedal Height >> Brake Pedal Pressed

Brake Pedal Pressed

  1. Start engine. Press brake pedal with approximately 110 lbs. (50 kg) of force. If clearance between brake pedal pad (foot contact) and floor is 3.5" (90 mm), pedal height is acceptable.
  2. If clearance is less than 3.5" (90 mm), bleed brake system. See BLEEDING BRAKE SYSTEM . If pedal height is still less than 3.5" (90 mm) after bleeding brake system, check brake lining clearance or for dragging parking brake.
scientia non olet · About LEMON Manuals