Speed Control Switches
WARNING: This page is about a different variant/trim than selected.
Access speed control switches. Disconnect both speed control switch 2-pin connectors. Using an ohmmeter, check both speed control switches. If either speed control switch does not test as specified, replace defective switch. See SPEED CONTROL SWITCH RESISTANCE table.
SPEED CONTROL SWITCH RESISTANCE
| Switch Position | Resistance (Ohms) | |
|---|---|---|
| ON/OFF & CANCEL Switch | ||
| None Depressed | 22,352-22,848 | |
| CANCEL | 0.0-0.5 | |
| ON/OFF | 653-668 | |
| SET/RESUME Switch | ||
| None Depressed | No Continuity | |
| SET | 1978-2022 | |
| RESUME | 5558-5682 | |