LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> Cirrus LXi >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (CRUISE CONTROL SYSTEMS - 95 Cirrus & Stratus (VIN X), 96 Breeze, Cirrus & Stratus) >> Removal & Installation >> Brake Switch >> Removal

Brake Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Fully depress brake pedal and rotate brake switch counterclockwise approximately 30 degrees. Remove brake switch from bracket.
  2. Depress lock tabs holding brake switch mounting bracket and separate harness connector from brake switch.
scientia non olet · About LEMON Manuals