LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1993 >> Imperial >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.3L V6 - VINS [R,T] & 3.8L V6 - VIN [L] >> Removal & Installation >> Fuel Pressure Release >> Dynasty, Fifth Avenue, Imperial & New Yorker

Dynasty, Fifth Avenue, Imperial & New Yorker

  1. Loosen fuel tank cap to release pressure. Disconnect injector wiring harness from engine wiring harness. Connect jumper wire from terminal No. 1 of injector harness to ground. See Fig 1 .
  2. Connect jumper wire to injector harness terminal No. 2. Touch jumper wire to positive battery terminal for no more than 5 seconds to release fuel pressure. Remove jumper wires, and reconnect wiring harness.
Fig 1: Injector Wiring Harness Terminal ID (Dynasty, Fifth Avenue, Imperial & New Yorker)
G90B02575Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals