LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1993 >> Imperial >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.3L V6 - VINS [R,T] & 3.8L V6 - VIN [L] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake and exhaust manifolds. See INTAKE MANIFOLD  and EXHAUST MANIFOLDS  . Disconnect necessary wiring and coolant hoses.
  2. Remove rocker arm assembly and push rods. See ROCKER ARMS & PUSH RODS  . Mark push rod locations for reassembly reference. Remove push rods. Remove cylinder head bolts in sequence. See Fig 1 . Remove cylinder head.
Fig 1: Cylinder Head Bolt Removal & Installation Sequence
G90H02578Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals